Samsung SVR-1680 User Manual Download

Page: 32 / 97

User Manual

menu will also work.

REW

: Press [REW] to modify playback speed in the reverse direction. (x2,

x4, x8, x16, x32, x64, x1/2, x1, x2, x4,

…)

Pressing [REW] during a live visual feed will play the recording

beginning from that moment in the reverse direction. Clicking

in the function menu will also work.

STEP FORWARD

: Pressing [PAUSE] and [FWD] during a playback will display the

frame next to the current screen. To return to regular playback

mode, press [PLAY].

STEP REWIND

: Pressing [PAUSE] and [REW] during a playback will display the frame

before the current screen. To return to regular playback mode, press

[PLAY].

1/2 REWIND

: Click

in the function menu to play data at x1/2 speed in the

forward direction.

1/2 FORWARD

: Click

in the function menu to play data at x1/2 speed in the

backward direction.

5.2 Search

This menu is used to search data by time or event log and play them.

Four options are provided in the Search menu: Time, Calendar, Event and Thumbnail.

Press [SEARCH] button on the front side of the console or click

in the function menu to

enter Search mode.

5.2.1 Time Search

Input the data and time to search by and select Search to move the visual data to the specified

moment.

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands