Samsung SVR-1680 User Manual Download Page 45

Page: 45 / 97

User Manual

6.4.1 Configuring Quick Recording Setup

Select

‘Quick Setup’

Recording Schedule

There are five options for this entry. The default value is "No Rec." and therefore will not record

on schedule without configuration.

No Rec. / Low / Standard / High / Custom

Except for "Custom", all options have preset fps, screen quality and resolution associated with

them.

Resolution

There are 3 options total. (CIF/ HALF/ D1)

This option can only be configured if Recording Schedule is set to Custom.

How to Check for Recording Operation

Once the schedule event has been successfully configured, the REC LED on the

front side of the console will light up. Also, the save status will be tagged with

[S], displaying that all channels are being recorded normally.

6.5 Recording Schedule Setup

This menu is used to configure recording operations per channel or for all channels. Also, it is

also used to configure recording schedules as well. After the user has configured Quick Setup,

modifying parameters in this menu will cause the values set in Quick Setup to be overwritten.

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands