Samsung SVR-1680 User Manual Download Page 70

Page: 70 / 97

User Manual

Block Playback

This function is used to play small sections of visual data recorded on the hard disk space. For

example, out of 10 days of recording, only two days of video may be played with Block Playback.

Disk Manager

Disk Manager is used to manage both internal and external HDDs connected to the DVR. It

manages the HDDs' status, bad sectors, size, disk usage, etc.

Disk Status

Use Disk Status to view the HDD's temperature and status.

Type

: Displays the location and type of the disk.

Int A (Internal A HDD), Int B (Internal B HDD), Ext (External

HDD)

Model

: Displays the HDD

’

s model name

Bad Sector

: Displays the presence of bad sectors of the HDD. When no bad

sector is detected, this option will be set to 0. Bad sectors in

unused HDDs are not checked for.

Size(MB)

: Displays the size of the HDD in MB.

: Displays the HDD usage.

Enabled

Yes: Used / No: Unused

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Brands by name

Popular brands