Samsung SVR-1680 User Manual Download

Page: 13 / 97

User Manual

Video

loss

detection

function

Event (Sensor, D-I/O, Video loss, Motion detection, Text) log

Each channels can support pre-emptive recording sequences up to 5 seconds

prior to an actual event

Search/Playback

Various search and playback options are offered for the user

’s convenience.

Playback by time, date and channel

Mouse interface increases data searchability

Forward/backward search functions in pause

Playback by event (Sensor, Video loss, Motion detection and Text) log

Remote controller and Jog/Shuttle function further improve searching

(The SVR-960/945 models do not support Jog/Shuttle.).

Full-frame playback (available in SVR-3200/1680/1660 only)

Data Storage

A hard disk is included in the product for the purpose of data storage. If the user desires, the

recorded data can be stored to DVD-R, CD-R or USB.

A built-in hard disk has been provided as a basic supply item

Multiple portable data storage media are supported: DVD-R, CD-R and USB

※

Refer to the appendix on the back of the manual regarding the type of

compatible

media.

Hard disk expansion device(External recording device) : SVS-5E (Option as

exclusive device) External hard disk expansion is supported with SVS-5E

(Available for purchase)

Networking

The product supports LAN, xDSL and such networking capabilities. Combined with the PC

interface client, the core features of the device can be easily controlled from a distance.

Summary of Contents for SVR-1680


































































































Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands

Samsung SVR-1680, User Manual

Search results

Summary of Contents for SVR-1680

Reviews:

Related manuals for SVR-1680

Brands by name

Popular brands