Samsung SMT-6011 User Manual Download Page 56

Page: 56 / 117

_ © SAMSUNG Electronics Co., Ltd.

Screen

Date and Time

Select

[Menu]



[Settings]



[Screen]



[Date and Time]

Time Zone

Select

[Menu]



[Settings]



[Screen]



[Time Zone]

You can select

[Auto]

and

[Manual]

Font

Select

[Menu]



[Settings]



[Screen]



[Font]

You can select font which is displayed on screen.

LCD Power Saving

Select

[Menu]



[Settings]



[Screen]



[LCD Power Saving]

Select the time when the LCD screen will be turned off.

- Always off/Off After 10 sec./Off After 20 sec./User configuration

Changing the default settings for the screen menu may affect the lifetime of the
LCD and, therefore, do not change them if possible.
Below are shown the default LCD power Saving settings.

- Screen off: User Configuration (08:00 to 18:00)

Line Display Name

Select

[Menu]



[Settings]



[Screen]



[Line Display Name]

You can set Line Display Name.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands