Samsung SMT-6011 User Manual Download

Page: 38 / 117

_ © SAMSUNG Electronics Co., Ltd.

Volume Control

The user can adjust the volume of a handset, speaker and tone sound.

Volume Control of a Handset

The user can adjust the volume in the following
way while making a call via a handset.

To increase the volume of a handset, press the
(+) of the

[Volume]

button.

To decrease the volume, press the (-) of the

[Volume]

button.

Volume Control of a Speaker

The user can adjust the volume of a speaker in the following way while
calling.

To increase the speaker volume, press the (+)
of the

[Volume]

button.

To decrease the speaker volume, press the (-)
of the

[Volume]

button.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands