Samsung SMT-6011 User Manual Download Page 32

Page: 32 / 117

_ © SAMSUNG Electronics Co., Ltd.

Dialing via Speaker Phone

Press the

[Speaker]

button without picking up a

handset.

Press a phone number, then you can hear a call connection tone.

Start the conversation when the other party answers the phone.

- If the handset is picked during a call, the speaker is turned off, and the conversation

can be continued through the handset.

When a call ends, press the

[Speaker]

button

again.

- If a handset is being used, hang up.

Dialing the Last Call Number

When you press the

[Log]

soft button at the bottom of waiting screen, the

recent call log is displayed.

Move to a phone number you want by using the navigation button.

And press the

[Call]

soft button, then a call is made to the selected

number.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands