Samsung SMT-6011 User Manual Download Page 5

Page: 5 / 117

SMT-i6010/6011 User Guide _

Caution

CAUTION

Power

Do not power off the phone while upgrading a program.

General

The LAN cable to the network
should be connected to the LAN
port of a phone, NOT to the PC
connection port.

Safety is not guaranteed if
expendable items or additional
goods are used unauthorized by
Samsung.

Do not place a heavy object on top
of the phone.

Do not attempt to disassemble, fix,
or rebuild the phone yourself.

Do not drop the product or apply
impact on the product. It may
damage product screen or exterior
and its internal parts.

Use a soft and dry cloth when
cleaning the phone. Do not spray
water directly onto the product; and
do not use chemicals such as wax,
benzene, alcohol, thinner, mosquito
killer, perfume spray, lubricant,
detergent, etc.

Do not install the phone under
direct sunlight.

Listening with a headset or
earphone at high volume may
damage your hearing.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands