Samsung SMT-6011 User Manual Download Page 13

Page: 13 / 117

SMT-i6010/6011 User Guide _

Connect the LAN cable connected to the network to the

LAN

connection port of the phone.

- When power is supplied from the LAN port (PoE), the phone is booted upon LAN

connection.

If PoE is not supported, connect the power adapter to the

power

connection port

. When the plug of the connected power adapter is

plugged into the outlet, the phone is booted up. (The power adapter is
purchased separately.)

- When connecting the power cable, make it go through the center hole of phone

cradle.

If a USB is used, connect a USB to the USB connection port.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands