Samsung SMT-6011 User Manual Download Page 49

Page: 49 / 117

SMT-i6010/6011 User Guide _

Sent Messages

You can save and check a sent message.

Select

[Menu]



[Message]



[Short

Message]



[Outbox]

Lists of sent messages are displayed.

[Delete]

: You can delete a selected message.

[Delete All]

: You can delete all the messages.

To view all message information, select
the message and then press

[OK]

button.

[Reply]

: You can reply to a counterpart who

sent a message.

[Fwd]

: You can forward a message to others by

pressing the below soft button.

[Option]:

You can use following function.

[Call]:

You can call the person who send the

message.

[Save]:

You can save the number who send the

message.

[Del]:You can delete

a message.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands