Samsung SMT-6011 User Manual Download Page 50

Page: 50 / 117

_ © SAMSUNG Electronics Co., Ltd.

Storage Box

This is the function used to save a created message temporarily.

Select

[Menu]



[Message]



[Short

Message]



[Draft Message]

A temporarily saved message is
displayed.

[Delete]

: You can delete a selected message.

[Delete All]

: You can delete all the messages.

To view all message information, select
the message and then press

[OK]

button.

[Forward]

: You can forward a message to

others by pressing the below soft button.

[Delete]

: You can delete a message.

Settings

You can set received message display method.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands