Samsung SMT-6011 User Manual Download Page 22

Page: 22 / 117

_ © SAMSUNG Electronics Co., Ltd.

Button

Function

LCD screen

The configuration of LCD screen is as follows:

- On the top of the screen, the icons representing phone

function settings are displayed.

- On the main screen, selectable menus, the call processing

status, or various messages are displayed.

- On the bottom of the screen, soft menus are displayed.

Handset

Handset transfers the caller’s voice.

Navigation button

The i6010/6011 phone has navigation buttons that allow users to use its functions
easily.

Button

Function

Navigation

Direction
key

This button is used to edit the contents on the screen or move
between menu items.

- This button is used to select or save the item where a cursor

is placed in a menu mode.

- This button is used to check the caller information received

from an outbound line during receiving.

Direction key

OK button

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands