Samsung SMT-6011 User Manual Download

Page: 40 / 117

_ © SAMSUNG Electronics Co., Ltd.

HOW TO USE MENUS

This section describes menu functions. Call, phone, and setup are displayed as a
menu.

Menu Structure

Clicking the

[Menu]

soft button when a phone is in standby mode displays menus on

a screen. The desired menu can be selected by using the navigation button or the
selection button on the right side of screen or the soft button at the bottom of screen.

Function with mark(*) may vary or does not supported depending on your system.

Sub-menus

Function

Contacts

This function provides save, search and registering
function of the phone address book. You can
search for a user registered in the directory server.

History

You can check the recent outgoing/incoming
history.

Message

You can write and save a message.

Notice &
News

Notice

You can check a notice.

News

You can check news.

Language

You can search and use the information provided
from the browser server.

Call Service

System
Service

You can set up system service.

Call Forward/
DND

You can set up the Call forward/DND function

AOM

You can check the registered AOM list.

Settings

Sound

You can select various bell sounds and button
sounds and adjust the sound volume.

Screen

You can change date, time, font, LCD power.

Line Display
Name

You can set up Line Display Name

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands