Samsung SMT-6011 User Manual Download Page 55

Page: 55 / 117

SMT-i6010/6011 User Guide _

Settings

You can set up screen, sound, language, password and lock and retrieve the phone
information.

Sound

Volume

Select

[Menu]



[Settings]



[Sound]



[Volume]

By pressing the navigation button, you can set the volume of a handset (receiver),
speaker, ringtone, key tone, headset, message alert, and alarm respectively.

Ring Tone

Select

[Menu]



[Settings]



[Sound]



[Ring Tone]

You can set up a ringtone.

Key Tone

Select

[Menu]



[Settings]



[Sound]



[Key Tone]

You can set up a key tone.

Message Tone

Select

[Menu]



[Settings]



[Sound]



[Message Tone]

You can set up a message alert sound.

System Ring Tone

Select

[Menu]



[Settings]



[Sound]



[System Ring Tone]

You can set up a system ring tone.

Bluetooth Ring

Select

[Menu]



[Settings]



[Sound]



[Bluetooth Ring]

You can set Bluetooth Ring Type.

Bluetooth Ring type is supported 6011 model only.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands