Samsung SMT-6011 User Manual Download Page 28

Page: 28 / 117

_ © SAMSUNG Electronics Co., Ltd.

After selecting the setup method, press
the

[Next]

soft button. Depending on the

selected setup method, the easy
installation step is changed.

- Select one of Standard/Server/PnP.

When the setup method is

[General]

- SIP registration server setup: Enter the SIP

server information.

- SIP registration information setup: Enter the

phone registration information.

- Time server setup: Enter the address and

update interval of time server.

When the setup method is

[Server]

- An ID or password is not required for phone

registration using a MAC address.

- Contact the system administrator about

whether to use an ID or password and
regarding environment server address.

When the setup method is

[PnP]

- If the setup method is PnP, the network

connection type is fixed to DHCP and network
setup step is omitted.

Press the

[Next]

soft button.

[Wireless]

function is supported SMT-i6011 only.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands