Samsung SMT-6011 User Manual Download

Page: 54 / 117

_ © SAMSUNG Electronics Co., Ltd.

AOM

Select

[Menu]



[AOM]

You can view or set program-key and
AOM device.

Move with arrow key or soft button, and
push

[OK]

button, then detail information

will be displayed. To change function, push

[Edit]

soft button.

Input information, and push

[Save]

soft

button.

- If you want to register new program key, select

mode to Enable and input informations.

- If you want to delete function of a program key,

select mode to Disable.

- If input information is not correct, you can not

The AOM button setup function may not be available depending on system.
If this function does not work properly, contact the system administrator.
For detail information about how to use the AOM button function, refer to the SCM
operation manual.

Dit document wordt u aangeboden door TelecomHunter.

Dé zakelijke Telecom webshop.

T 088 7463 444 | [email protected] | www.TelecomHunter.nl

Summary of Contents for SMT-6011






















































































































Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands

Samsung SMT-6011, User Manual

Search results

Summary of Contents for SMT-6011

Reviews:

Related manuals for SMT-6011

Brands by name

Popular brands