Samsung R40 Manual Download | Manualshive

Page: 157 / 158

background image

SAMSUNG Notebook Computer Global Warranty

1.

What is Global Warranty System (GWS) ?

Warranty Repair Service will be provided by Samsung Electronics Co., Ltd as required during Warranty period.

2.

What is process ?

a.

The GWS service only applies to the regions mentioned below.

b.

Only products that are subject to GWS, and are within the guar-
antee period apply.

c.

When the computer unit is damaged (outside of the region pur-
chased), please contact and receive repair services from the
local SAMSUNG appointed service center (ASC). Since the
repair methods may be different for products purchased locally,
please check with the local ASC.

d.

Consultations made locally (outside of the region purchased) can
be given in the local language.

e.

Whether a product can or cannot be fixed will be determined
after a thorough examination, and the damaged product may not
be repaired to its original state, as circumstances may dictate.

f.

When a product cannot be repaired locally (outside of the region
purchased) please contact the national SAMSUNG appointed
service center for further enquiries.

g.

The only warranty provided under GWS is repair where reason-
ably practicable, replacement or credit is not supported under this
scheme.

h.

The length of time needed to obtain spare parts may depend on
the type of part, and in some cases may not be replaceable.

i.

Accessories (such as the battery) or the AC cable, are excluded
from the warranty.

j.

The User's Guide, drivers, and the operating system will not be
provided and are not purchasable locally (outside of the region
purchased).

k.

Software and operating system consultation and repair services
will not be provided. When moving abroad (outside of the region
purchased), please ensure that the Recovery CD, Software CD,
and the User's Guide are taken along as well.

l.

All costs arising from customs duties when moving abroad (out-
side of the region purchased) are the user's responsibility.

m.

Malfunctions and damages caused by the user's abuse and
neglect, or through other circumstances such as fires, earth-
quakes, floods, lightning, natural disasters, environmental pollu-
tion, and abnormal electricity currents will not be covered by the
warranty. All other circumstances are subject to conditions in the
warranty.

Korea - Samsung Contact Center

416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, Korea
Tel:

82 1588 3366

Homepage: www.sec.co.kr

U.S.A. - InteliSol [Technical Solution for Intelligent Business]

1001 NE Loop 820 Dock 5 Forth Worth, TX 76131, U.S.A.
Tel:

1 817 230 5293

FAX:

1 817 230 5045

E-Mail: [email protected]

Canada - HINET

425 Superior BLVD. #4 Mississauga, Ontario L5T 2W5, Canada
Tel:

1 905 565 1211

FAX:

1 905 565 1911

E-Mai: [email protected]

U.K. / Ireland - Samsung Call Center

Tel:

44 870 242 0303

Homepage: www.Samsung.co.uk

Germany / Swiss - Samsung Call Center

Tel:

49 1805 121 213

FAX:

49 1805 121 214

Homepage: www.samsung.de

France - Samsung Call Center

Tel:

33 8 2508 6565

Homepage: www.samsung.fr

Spain - Samsung Call Center

Tel:

34 902 101 130

FAX:

34 93 262 6766

Homepage: www.samsung.com/es

Portugal - Samsung Call Center

Tel:

351 808 200 128

FAX:

351 21 425 1001

Homepage: www.samsung.com/pt

Australia - Thomas Electronics ESG Australia.

4 Sheridan Close, Milperra NSW 2214, Australia
Tel:

61 2 9773 7400

FAX:

61 2 9773 7177

E-mail: [email protected]

NewZealand - Datacom Repair Center

Ground Floor 160 Grafton Road Auckland 1005 New Zealand
Tel:

64 9 356 1457

FAX:

64 9 356 1493

E-mail: [email protected]

Please refer to http://www.samsungcomputer.com . Rev. 1.4

Japan - Samsung Contact Center

416, Maetan-3Dong, Yeongtong-Gu, Suwon-City, Gyeonggi-Do, Korea
Tel:

0034-800-40-3366

Homepage: www.sec.co.kr

Hongkong - Samsung Electronics H.K. CO., Ltd.

11/F, Phase2, MTL Warehouse Building, Berth One, Kwai Chung, NT, Hong
Kong
Tel:

852 2862 6001

FAX:

852 2862 6971

Homepage: www.samsung.com/hk

India - Samsung Electonics India Service Center

2nd fl CC-28, Nehru Enclave Kalkaji, New Delhi, India 110019
Tel:

1600 1100 11, 3030-8282

Homepage: www.samsung.com/in

Singapore - Samsung Asia Pte. Ltd.

20 Toh Guan Road, Accord Distri Centre #01-01, Singapore 608839
Tel:

1800 726 7864

Homepage: www.samsung.com/sg

Malaysia - Samsung Malaysia Electonics Sdn. Bhd.

3B-1-1. Level 1, Block 3B, Plaza Sentral, Jalan Stesen Sentral 5, KL
Sentral, 50470 Kuala Lumpur, Malaysia
Tel:

1 800 88 9999

Homepage: www.samsung.com/my

Thailand - Samsung Customer Service Plaza(Bangkok)

1 floor Boonmitr Building 138 Silom Rd., Suriyawong, Bangrak, Bangkok,
10500
Tel:

1800-29-3232 (0-2689-3232) FAX:

0-2689-3298

Homepage: www.samsung.com/th

«
...
155
156
157
158
»

Summary of Contents for R40































































































































































Reviews:

No comments

Related manuals for R40

Brand: Tandy Pages: 110

Aspire One AOP531h

Brand: Acer Pages: 12

AMILO Xa 2528-12P

Brand: Fujitsu Siemens Computers Pages: 2

Inspiron 14 5420

Brand: Dell Pages: 68

Brand: Samsung Pages: 2

Brand: Samsung Pages: 3

Brand: Samsung Pages: 2

Brand: Samsung Pages: 3

Brand: Samsung Pages: 2

Brand: Samsung Pages: 4

Brand: Samsung Pages: 2

Brand: Samsung Pages: 3

NP-R538E User Manual (FreeDos)

Brand: Samsung Pages: 83

NP-R528CE (FreeDos)

Brand: Samsung Pages: 75

Brand: Samsung Pages: 80

NP-R518 (FreeDos)

Brand: Samsung Pages: 88

Brand: Samsung Pages: 84

Brand: Samsung Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands