Samsung R40, Manual

Page: 142 / 158

7-21
Chapter 7. Recovering the Computer
• If the TCP/IP Settings are configured to DHCP, the address is automatically con-
figured to an address within the subnet IP range. This will take about 2~3 min-
utes.
• If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter, configure IP
ad-dress:10.0.0.1~10.0.0.254, and Subnet mask: 255.255.0.0, and then try
again.
• A fixed IP is recommended for a small-size network.
Q6 When using a computer-to-computer (Ad Hoc) network, some-
times I cannot search the access point.
A It may happen occasionally when you are using a computer-to-computer (Ad
Hoc) network connection. Even if you cannot find some access points, the com-
puter-to-computer (Ad Hoc) network is operating properly. Click Refresh to view
the latest search result.
Q7 The network does not operate properly when both the wireless
and the wired net-work connections are simultaneously config-
ured with the same IP address.
A You cannot use the wireless and the wired network connections using the same IP
address simultaneously. To use either the wireless or the wired network in turn
with the same IP ad-dress, you have to Disable whichever network device will not
be used in the network connection of the Control Panel.
Q8 The wireless LAN does not work properly when there is a device
operating on an adjacent frequency in the vicinity of the prod-
uct.
A1 Channel interference may occur when a wireless video transceiver or a
microwave oven is be-ing used.If you experience channel interference from other
equipment, we recommended changing the channel to connect to the AP. For
more information about AP settings, refer to the User Manual supplied by the AP
manufacturer.
A2 Since IEEE802.11g equipment operates in hybrid mode when there is active
IEEE802.11b equipment, the data rate may be degraded.