Samsung R40, Manual

Page: 133 / 158

7-12
Manual
2. In the [Display Properties] window, select the
Settings
tab
> Advanced > CAT-
ALYST Control Center tab.
3. Click the ATI CATALYST Control Center button and run the CATALYST Control
Center .
4. From the View menu, select the Advanced View item.
5. Select Avivo Video > Theater Mode and set the Clone Mode Overlay Display
item to Theater Mode. You can then view the video on both LCD and CRT.
Q7 After connecting to a TV, some programs such as Debug, Mem,
etc. do not run in full screen MS-DOS mode.
A If a TV is used as the display device, some programs such as Debug, Mem, etc.
may not run properly in full screen MS-DOS mode. Run the programs in the MS-
DOS window.
Q8 The Taskbar on the bottom of the screen does not appear when
a projector is used as the display device.
A A This may happen, even though WXGA LCD supports the 1280 x 800 mode,
the projector does not support that mode. In this case change the resolution to
1024x768 (recommended) on your computer.
Q9 When a TV is connected, the Turn off monitor power option is
not performed.
A When connecting a TV after booting up your computer, the Turn off monitor
power option may not be performed. For it to operate properly, it is recommend-
ed to connect a TV and then booting up the computer.
Q10 The color is strange when the picture is displayed on the con-
nected monitor (or projector).
A Check the monitor signal cable connection and reconnect the cable.
Q11 If I run the Catalyst Control Center of the graphics driver, it
appears on the screen after some time.
A Since the Catalyst Control Center is developed based on the .Net Framework of
Microsoft, some time is required to define the .Net Framework settings when
launched for the first time.
r40-hk_ch7 2006.5.15 4:11 PM 페이지12 1000 Dolev-2540-Color-S T