48
- English
R
ecording
Copying from a Camcorder
Check that the disc has enough available space for the
recording. Adjust the record mode. See pages 25~26 to
see how to connect the camcorder to your DVD recorder.
1
Press the
OPEN/CLOSE
button, and place a
recordable disc on the disc tray.
2
Press the
OPEN/CLOSE
button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
If an unused DVD-RW disc is inserted, whether to
initialize or not will be asked first. (See page 44)
3
Press the
REC MODE
button repeatedly (or press
the
REC MODE
button and then press the
…
…†
†
button) to select the recording speed(quality).
➞
SP
➞
LP
➞
EP
➞
XP
4
Press the
INPUT SEL.
button to select
DV
.
If the input is set to
DV
, a playback/record menu that
enables Digital camcorder control appears on the top
of the screen.
You may control a Digital Camcorder using the IEEE1394
(DV) interface.
5
Select the
PLAY ( )
icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
6
To start recording, select
REC
( ) icon in the top side
of the screen using the
œ √
buttons, then press the
ENTER
button.
To stop recording
Press the
STOP (
)
button to stop or finish
recording in progress.
• When using DVD-RW/DVD-R discs, the message
‘Updating the information of disc. Please wait for
a moment’ is displayed.
Before you start
■
You can not change the record mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
DVD-RW discs must be formatted before
starting to record. Most new discs are sold
unformatted.
■
Do not use DVD-R authoring discs with
this unit.
■
To access on-screen controls during
recording, press the
œ
or
√
buttons.
■
When copying from a camcorder and the
end of the tape is reached (no Video), the
screen may turn blue or purple.
NOTE
√
●
Record Mode
XP (01:11)
SELECT
MOVE
RETURN
DV
The DV device is connected
01002B-R130-XAC-ENG-43-52 2006.2.6 6:44 PM Page 48