3. Replacemen
6. Push up the steel frames, and tighten the three scre
7 M k
th t
bb
d (l ft id )
d t
7. Make sure the two rubber pads (left side) and two p
DADF on both sides touch the top of the machine as
CAUTION -
If you skip this step, it could cause origina
CAUTION
- If the gap is more than 0.5 mm (0.02 inch)
the gap is smaller 0.5 mm (0.02 inch). You have to che
Service Manual
CLX-9250/9350 series
3-8
nt Procedures
ews.
l
ti
j
ti
( i ht id )
th b tt
f th
plastic projections (right side) on the bottom of the
s shown below.
als to jam.
), adjust the screw on both sides as shown below until
eck all rubber pads and plastic projections.
SAMSUNG ELECTRONICS
88
