3. Replacemen
This section contains the procedures for disassembling
To remove the Exit Drive Unit, perform the following pr
3.11 Exit drive unit
1. Open the engine/video shield door.
2. Remove fuser out fan and duplex fan.
3. Remove exit drive unit after removing 3 screws and
3 11 1 F ser/E it dri e motor
Perform the following procedure to remove the Fuser/E
To remove the motor, remove 4 screws and 1 connecto
3.11.1 Fuser/Exit drive motor
Service Manual
CLX-9250/9350 series
3-7
nt Procedures
g the Exit Drive Unit components of the printer.
rocedure.
all connectors.
Exit Drive Motor from the Exit Drive Unit.
or.
SAMSUNG ELECTRONICS
79