Samsung CLX-9350ND Service Manual Download Page 145

Page: 145 / 549

3. Replacemen

Perform the following procedure to remove the Lamp
To replace the lamp, you must first remove the scan g

3.4.3 Lamp

1. Remove the 3 screws.
2. Remove the connector cover [A]. Remove 1 screw

[A]

3. Remove 2 screws.

[B]

Service Manual
CLX-9250/9350 series

3-1

nt Procedures

from the Scan Unit.

glass (3.4.1).

w (ground harness). And unplug the connector.

4. Remove the rear cover [B] by slightly lifting up
and push back.

[B]

SAMSUNG ELECTRONICS

Summary of Contents for CLX-9350ND






































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CLX-9350ND

Reviews:

Samsung CLX-9350ND, Service Manual, Page: 145 / 549

Search results

Summary of Contents for CLX-9350ND

Reviews: