1. Preca
1.2 Caution for safety
1.2.1 Toxic material
This product contains toxic materials that could cause i
(1) If the LCD control panel is damaged it is possible fo
with the skin should be avoided. Wash any splashe
doctor. If the liquid gets into the mouth or is swallow
(2) Please keep Drum cartridge and Toner cartridge aw
Drum cartridge and Toner Cartridge may be harmfu
1.2.2 Electric shock and fire safety p
Failure to follow the following instructions could cause e
(1) Use only the correct voltage, failure to do so could d
electric shock.
(2) Use only the power cable supplied with the printer.
( )
y
p
pp
p
cable to overheat and potentially cause a fire.
(3) Do not overload the power socket, this could lead to
lead to a fire.
(4) Do not allow water or other liquids to spill into the p
paper clips, pins or other foreign objects to fall into
to an electric shock or fire hazard.
(5) Never touch the plugs on either end of the power ca
( )
p g
p
When servicing the printer remove the power plug f
(6) Use caution when inserting or removing the power c
firmly and pull. The power connector must be insert
overheating possibly leading to a fire.
(7) Take care of the power cable. Do not allow it to bec
damaged. Do not place objects on top of the power
overheat and cause a fire. Exposed cables could ca
cable immediately do not reuse or repair the dama
cable immediately, do not reuse or repair the dama
the power cable, weakening the cover or exposing
(8) Ensure that the power sockets and plugs are not cra
should be repaired immediately. Take care not to c
the machine.
(9) Use caution during thunder or lightning storms. Sam
from the power source when such weather conditio
power cord if it is still connected to the wall socket i
p
(10) Avoid damp or dusty areas, install the printer in a c
machine near a humidifier or in front of an air cond
can lead to overheating and cause a fire or cause
(11) Do not position the printer in direct sunlight. This w
possibly leading to the printer failing to work prope
(12) Do not insert any metal objects into the machine th
could make contact with a high voltage conductor
Service Manual
CLX-9250/9350 series
1-
autions
illness if ingested.
or the liquid inside to leak. This liquid is toxic. Contact
es from eyes or skin immediately and contact your
wed see a doctor immediately.
way from children. The toner powder contained in the
ul and if swallowed you should contact a doctor.
precautions
electric shock or potentially cause a fire.
damage the printer and potentially cause a fire or
Use of an incorrectly specified cable could cause the
y p
o overheating of the cables inside the wall and could
rinter, this can cause electric shock. Do not allow
the printer these could cause a short circuit leading
able with wet hands, this can cause electric shock.
from the wall socket.
connector. When removing the power connector, grip it
ted completely, otherwise a poor contact could cause
come twisted, bent sharply around corners or wise
r cable. If the power cable is damaged it could
ause an electric shock. Replace the damaged power
aged cable Some chemicals can attack the coating on
aged cable. Some chemicals can attack the coating on
cables causing fire and shock risks.
acked or broken in any way. Any such defects
ut or damage the power cable or plugs when moving
msung recommends that this machine be disconnected
ons are expected. Do not touch the machine or the
in these weather conditions.
clean well ventilated location. Do not position the
ditioner. Moisture and dust built up inside the machine
parts to rust.
will cause the temperature inside the printer to rise
erly and in extreme conditions could lead to a fire.
hrough the ventilator fan or other part of the casing, it
inside the machine and cause an electric shock.
SAMSUNG ELECTRONICS
-2
