3. Replacemen
Perform the following procedure to remove the Therm
3.5.2 Thermistor
1. Take off the Bracket fuser top [A] after removing 4 s
CAUTION
2. Take off the thermistor assembly after removing 2 sc
CAUTION
When removing 2 screws pointed by the a
CAUTION
Be careful not to bend the thermistor.
NOTE
Contact type NTC thermistors work in NON-CON
f
b lt
f
Service Manual
CLX-9250/9350 series
3-3
fuser belt surface.
nt Procedures
istor from the Fuser Unit.
screws.
[A]
rews.
arrow, be careful not to damage in harness
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
NTACT conditions. They must not touch
SAMSUNG ELECTRONICS
30