Samsung CLX-9350ND Service Manual Download Page 319

Page: 319 / 549

6. Preventive

6.2.3 Cartridge transfer unit / cartrid

6.2.3.1 Cartridge transfer unit

[A]

[B]

Service Manual
CLX-9250/9350 series

6-1

Maintenance

ge transfer cleaner

1. Open the front cover.
2. Remove the waste toner container [A].

CAUTION

Be careful not to hurt yourself while removing
the waste toner container.

3. Open the inner front cover [B] by pushing the
handle.

4. Remove two Fixers and one screw.

SAMSUNG ELECTRONICS

Summary of Contents for CLX-9350ND






































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CLX-9350ND

Reviews:

Samsung CLX-9350ND, Service Manual, Page: 319 / 549

Search results

Summary of Contents for CLX-9350ND

Reviews: