manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 3

S

ETUP

 G

UIDE

3

English

Step 1.

 

Unpacking

1

Remove the printer and all of the accessories from the 
packing carton. Make sure that the printer has been packed 

with the following items:

N

OTES

:

• If any items are missing or damaged, notify your dealer 

immediately. 

• Components may differ from one country to another.
• The CD-ROM contains the printer driver, the User’s Guide, and 

the Adobe Acrobat Reader program.

• The power cord may be different depending on your country.

C

AUTION

: This printer weighs 32kg including developer cartridge 

and cassette. Use safe lifting and handling techniques. If you need 

to move the printer it should be moved by two people. Use the 

lifting handles located, as shown in the diagram (see page 5). Back 

injury could result if a single person attempts to lift the printer.

Toner Cartridges

Power Cord

Quick Install Guide

CD-ROM

Optimum Setup Guide

SyncThru CD-ROM

(CLP-510N only)

SyncThru Quick Guide

(CLP-510N only) 

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands