manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 156

M

AINTAINING

 Y

OUR

 P

RINTER

6.31

6

3

First, gently pull the cartridges by their handle to erase 

them out of their slot, but when you are ready to lift them 

out of the printer, transfer your grip to the body of the 

cartridges, and lift them out with both hands. Set them on a 

clean flat surface. 

4

Press the top cover release button to unlatch the top cover 

and open it all the way.

C

AUTION

: If you leave the left cover open for more than a few 

minutes, the imaging unit can be exposed to light. This will cause 

damage to the imaging unit. Close the top and left covers should 

the insallation needs to be halted for any reason.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands