manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 158

M

AINTAINING

 Y

OUR

 P

RINTER

6.33

6

7

Lift the handle of the imaging unit and use it to lift the 

imaging unit out of the printer. Set it on a clean flat surface.

C

AUTIONS

: 

• To prevent damage, do not expose the imaging unit to light for 

more than a few minutes. Cover it with black paper, if necessary.

• Close the top and left covers should the installation needs to be 

halted for any reason.

• Do not touch the surface of the green roller on the imaging unit, 

or print quality problems can occur.

8

Look inside the printer. Remove any dust, paper particles, 

and spilled toner with a damp, soft lint-free cloth, or small 

vacuum cleaner.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands