Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 22

Page: 22 / 266

ETUP

UIDE

Installing Printer Software in Windows

Verify the following before you install the printer software:

OTES

• For Windows NT 4.0/2000/XP/2003, the system administrator

should install the software.

• Windows 95 and Windows NT 4.0 are only supported on the CLP-510N.

AUTION

: For the CLP-510N, to print a document in Windows 95

or Windows NT 4.0, you must install SyncThru and then add a

network printer port. For details about installing SyncThru and

adding a port, please refer to Network Management Software

Quick Guide and SyncThru User’s Guide.

All applications should be closed on your PC before beginning

installation.

Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.

If the CD-ROM drive does not automatically run:

Select Run from the Start menu, and type x:\setup.exe

in the Open box (where x is the drive letter for the CD-ROM

drive), then click OK.

OTE

: If the New Hardware Found window appears during the

installation procedure, click in the upper right corner of the box

to close the window, or click Cancel.

Item

Requirements

Operating system

Windows 95/98/Me/NT 4.0/2000/XP/

2003

RAM

95/98/Me

32 MB

NT 4.0/2000

64 MB

128 MB

2003

256 MB

Free disk space

95/98/Me/NT 4.0/

2000/XP/2003

300 MB

Internet Explorer

5.0 or higher

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Search results

Summary of Contents for CLP-510 - Color Laser Printer

Reviews:

Brands by name

Popular brands

Samsung CLP-510 - Color Laser Printer, Setup Manual

Search results

Summary of Contents for CLP-510 - Color Laser Printer

Reviews:

Brands by name

Popular brands