manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 105

P

RINTING

 T

ASKS

4.14

To use a saved setting, select the item from the Favorites drop 

down list. 

The printer is now set to print according to the Favorites setting 

you selected.

To delete a Favorites item, select it from the list and click 

Delete. 

You can also restore the printer driver’s default settings by 

selecting <Printer Default> from the list. 

Using Help

Your printer has a help screen that can be activated using the 

Help button in the printer properties window. The help screen 

gives you detailed information about the printer features 

provided by the printer driver.

You can also click 

 in the upper right hand corner of the 

window, and then click on any setting. 

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands