manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 135

M

AINTAINING

 Y

OUR

 P

RINTER

6.10

7

Make sure that the color of the toner cartridge matches the 

color slot and then slide the new toner cartridge into the 

printer. Using both hands, insert the cartridge into the slot. 

Then use the handle to slide the cartridge in.

When the toner cartridges are correctly installed, the yellow 

and black cartridges will not fully be inserted. These will 

automatically move into place when you close the left cover.

8

Close the left cover. Make sure that the cover is securely 

latched, and then turn the printer on. 

If you have installed the toner cartridges incorrectly, the left 

cover will not close properly. Check again to make sure the 

cartridge colors correspond to those marked on the right 

hand side. Never force the cover closed.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands