manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 213

U

SING

 Y

OUR

 P

RINTER

 

IN

 L

INUX

B.2

Installing the Printer Driver

System Requirements

Supported OS
• Redhat 6.2/7.0/7.1 and above
• Linux Mandrake 7.1/8.0 and above
• SuSE 6.4/7.0/7.1 and above
• Debian 2.2 and above
• Caldera OpenLinux 2.3/2.4 and above
• Turbo Linux 6.0 and above
• Slackware 7.0/7.1 and above

Recommended Capacities
• Pentium IV 1 GHz or higher
• RAM 256 MB or higher
• HDD 1 GB or higher

Software
• Glibc 2.1 or higher
• GTK+ 1.2 or higher
• GhostScript

Installing the Printer Driver

1

Make sure that you connect the printer to your computer. 
Turn both the computer and the printer on.

2

When the Administrator Login window appears, type in 
“root” in the Login field and enter the system password.

N

OTE

: You must log in as a super user (root) to install the printer 

software. If you are not the super user, ask your system 

administrator.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands