Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 122

Page: 122 / 266

DVANCED

RINTING

5.17

Using Status Monitor

If an error occurs while printing, the Status Monitor window

appears, showing the error.

OTES

• The Status Monitor program can only be used if you connect the

printer to your computer with the USB cable, or on a network.

• You can use Status Monitor in Windows 98/Me/NT 4.0/2000/

2003/XP.

Installing Status Monitor

To install Status Monitor, select Custom and then Status

Monitor while installing the software. For details, refer to the

Setup Guide supplied with your printer.

If you selected Typical while installing the software, you can

install Status Monitor as follows:

From the Start menu, select Programs

➔

Samsung CLP-

510 Series.

Or place the CD-ROM into the CD-ROM drive.

Select Maintenance.

Select Repair.

OTE

If your printer is not already connected to the computer,

the following window will appear.

• After connecting the machine, click Next.
• If you want to skip the connection status, click Next and No to

the following screen.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Search results

Summary of Contents for CLP-510 - Color Laser Printer

Reviews:

Brands by name

Popular brands

Samsung CLP-510 - Color Laser Printer, Setup Manual

Search results

Summary of Contents for CLP-510 - Color Laser Printer

Reviews:

Brands by name

Popular brands