manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 20

S

ETUP

 G

UIDE

20

Step 7.

 Printing a Demo Page

Print a demo page to make sure that the printer is operating 

correctly.

To print a demo page:

In ready mode, press and hold the Upper Level button (

) on 

the control panel for 2 seconds to print a demo page.

A demo page showing the printer’s features and capabilities is 

printed.

Step 8.

 Changing the Display Language

To change the language that is displayed on the control panel, 

take the following steps:

1

In ready mode, press the Menu button (

) on the control 

panel until you see “Setup” on the bottom line of the 

display.

2

Press the Enter button (

) to access the menu.

3

Press the Enter button (

) when “LCD Language” displays 

on the bottom line of the display.

4

Press the scroll button (

 or 

) until the language you 

want to use is displayed.

5

Press the Enter button (

) to save the selection.

6

Press the On Line/Continue button (

) to return to 

ready mode.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands