manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 188

S

OLVING

 P

ROBLEMS

7.21

7

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be 

avoided. If a paper jam occurs, follow the steps outlined in 

“Clearing Paper Jams” on page 7.6. 

• Follow the procedures on page 3.4. Ensure that the adjustable 

guides are positioned correctly.

• Do not overload the paper tray. Ensure that the paper is below 

the paper limit mark on the inside wall of the tray.

• Do not remove the paper from the tray while printing.

• Flex, fan, and straighten the paper before loading. 

• Do not use creased, damp, or highly curled paper.

• Do not mix paper types in a tray.

• Use only recommended print materials. See “Paper 

Specifications” on page E.4.

• Ensure that the print side is facing down when loading paper 

in a tray and in the Multi-purpose Tray.

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands