manualshive.com logo in svg

Samsung CLP-510 - Color Laser Printer, Setup Manual

Share
Download
Samsung CLP-510 - Color Laser Printer Setup Manual Download Page 250

D.13

D

4

Place the printer over the tray, aligning the feet on the 
printer with the positioners on the optional tray.

C

AUTION

: This printer weighs 32kg including developer cartridge 

and cassette. Use safe lifting and handling techniques. If you need 

to move the printer, it should be moved by two people. Use the 

lifting handles located as shown in the diagram. Back injury could 

be caused if a single person attempts to lift the printer.

5

Load paper in the optional tray. For information about 
loading paper in this tray, see “Using the Optional Tray 2” 

on page 3.8.

6

Reconnect the power cord and cables and then turn the 
printer on.

When you print a document on paper loaded in Tray 2, you must 

configure the properties of the printer driver. 

To access the properties of the printer driver:

1

Click the Windows Start menu.

2

For Windows 95/98/Me/NT 4.0/2000, select 

Settings

 and 

then 

Printers

.

For Windows XP/2003, select Printers and Faxes.

3

Select the 

Samsung CLP-510 Series

 printer.

Lifting handles are

located at the lower

edge of both sides of

the printer.

I

NSTALLING

 P

RINTER

 O

PTIONS

Summary of Contents for CLP-510 - Color Laser Printer











































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands