Samsung AM080JXVHGH/EU, Installation Manual

Page: 106 / 122

106
Setting the MCU and Pipe Addresses (for HR Only)
Setting the Pipe Addresses Manually
You can use the wired or wireless remote control or the S-NET Pro 2 to set the pipe addresses for each indoor unit .
Setting by using the wired or wireless remote control (For how to operate the remote control
buttons, see the remote control user manual.)
1 . Turn on both the indoor unit and the remote control .
2 . Enter the “Option setting mode” on the remote control .
3 . Set the address of each MCU port that is connected to an indoor unit by referring to the following table . (You can
also set the address of each indoor unit .)
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Value
0
A: Address setting
mode
0: The address of the indoor
unit will not be set .
1: The address of the indoor
unit will be set .
0 to 9: Hundreds
digit of the indoor
unit address
0 to 9: Tens digit
of the indoor unit
address
0 to 9: Units digit
of the indoor unit
address
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Value 1 0
0: The RMC address will not
be set .
1: The RMC address will
be set .
0
0 to F: RMC group
channel
0 to F: RMC group
address
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Value 2 0
0: The MCU address will
not be set .
1: The MCU address will
be set .
0 to 1: Tens digit of
the MCU address
0 to 9: Units digit of
the MCU address
A to F: MCU port
address
Option SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
Value 3 0 0 0 0 0
Examples> If the indoor unit whose address is not yet set is connected to port A on the MCU 1, set 0A0000-100000-
20101A-300000 .
If the indoor unit whose address is set to 9 is connected to port B on the MCU 2, set 0A1009-100000-
20102B-300000 .
Setting by using S-NET Pro 2
X f
Set the pipe addresses by using Add-on > Change address on S-NET Pro 2 . (For more information, see the S-NET
Pro 2 Help .)
DVM S HE_IM_DB68-05461A-08_EN.indd 106 2017-03-24 오후 1:38:46