Samson 3730-4, Mounting And Operating Instructions

Page: 143 / 212

EB 8384-4 EN
143
Physical Block, Slot 0 · Manufacturer-specific parameters Appendix
Test function AUTO: Data logger – data set 15
Data set 15 consisting of 2 packages (one package consisting of w, x, y, e and t variables)
Indicates the product number of the positioner.
Further detailed information of the device, bitwise coded. More than one alarm possible at once.
Byte Bit Description Byte Bit Description
Restriction of working range:
2 1 Downwards
2 2 Upwards
2 3 Change not possible
2 4
Dynamic stress factor
> 90 %
Inner leakage (shut-off):
2 5 Perhaps existing
2 6 Greater than in original state (TEST)
2 7 Greater than in original state
External leakage:
3 0 Perhaps soon to be expected
3 1 Perhaps existing
3 2 Existing
Zero point:
3 3 Shift monotonously downwards, aver-
age above reference lines
3 4 Shift monotonously upwards, average
above reference lines
3 5 Alternating, average above ref. lines
3 6 Shift monotonously downwards, aver-
age below reference lines
3 7 Shift monotonously upwards, average
below reference lines
4 0 Alternating, average below ref. lines
Positioner/valve attachment:
4 1 Travel transmission not optimal (TEST)
4 2 Perhaps loose
4 3 Perhaps restricted by working range
4 4 Perhaps loose (TEST)
Working range:
4 5 Mostly near closing position
4 6 Mostly near max. opening
4 7 Mostly closing position
5 0 Mostly max. opening
5 1 Temperature below –40 °C
5 2 Temperature above 80 °C
5 3 Reference test canceled
5 4 Actuator movement possible
5 5 Actuator movement not possible
5 6 Solenoid valve fault
5 7 –
Diagnostic alarms irrelevant of the selected classification
Binary input options for triggering in the data logger.
Note : This parameter can only be selected in firmware version K 1.11 and higher.