Samson 3730-4, Mounting And Operating Instructions

Page: 98 / 212

Fault/diagnostic alarm
Value (hex) Status alarm acc. to
Profile 3.01
Working at full capacity TEST 0x80 GOOD_NON_SPECIFIC
Perhaps modified 0x80 GOOD_NON_SPECIFIC
Actuator springs
Perhaps spring stiffness reduced TEST 0x80 GOOD_NON_SPECIFIC
Perhaps bias reduced TEST 0x80 GOOD_NON_SPECIFIC
Perhaps bias increased TEST 0x80 GOOD_NON_SPECIFIC
Working at full capacity 0x80 GOOD_NON_SPECIFIC
Working at full capacity TEST 0x80 GOOD_NON_SPECIFIC
Shifting working range
Shifting working range close 0x80 GOOD_NON_SPECIFIC
Shifting working range open 0x80 GOOD_NON_SPECIFIC
Friction
Much higher over whole range 0x80 GOOD_NON_SPECIFIC
Much lower over whole range 0x80 GOOD_NON_SPECIFIC
Much higher over partial range 0x80 GOOD_NON_SPECIFIC
Much lower over partial range 0x80 GOOD_NON_SPECIFIC
Much higher over whole range TEST 0x80 GOOD_NON_SPECIFIC
Much lower over whole range TEST 0x80 GOOD_NON_SPECIFIC
Much higher over partial range TEST 0x80 GOOD_NON_SPECIFIC
Much lower over partial range TEST 0x80 GOOD_NON_SPECIFIC
Leakage in pneumatics
Perhaps existing TEST 0x80 GOOD_NON_SPECIFIC
Perhaps existing 0x80 GOOD_NON_SPECIFIC
Perhaps too large TEST 0x80 GOOD_NON_SPECIFIC
Perhaps too large 0x80 GOOD_NON_SPECIFIC
Limit range
Down 0x80 GOOD_NON_SPECIFIC
Up 0x80 GOOD_NON_SPECIFIC
Modification impossible 0x80 GOOD_NON_SPECIFIC
Dynamic stress factor
Load factor > 90 % 0x80 GOOD_NON_SPECIFIC
Inner leakage
Perhaps existing 0x80 GOOD_NON_SPECIFIC
98
EB 8384-4 EN
PROFIBUS-PA communication