Samson 3730-4, Mounting And Operating Instructions

Page: 142 / 212

142
EB 8384-4 EN
Appendix Physical Block, Slot 0 · Manufacturer-specific parameters
DATALOGGER_DS_15 125 r Element Parameter name Test function AUTO: Data logger – data set 15
Data set 15 consisting of 2 packages (one package consisting of w, x, y, e and t variables)
0 SOLLWERT_W_1
1 ISTWERT_X_1
2 STELLSIGNAL_Y_1
3 REGELABWEICH_E_1
4 ZEIT_T_1
5 SOLLWERT_W_2
6 ISTWERT_X_2
7 STELLSIGNAL_Y_2
8 REGELABWEICH_E_2
9 ZEIT_T_2
DEVICE_PRODUCT_NUM 51 S r/w ALL Indicates the product number of the positioner.
DIAG_EVENT_SWITCH_2
61 S r/w ALL
DIAGNOSIS_
EXTENSION_2 60 r Bit:
0 = false · 1 = true
Byte Bit
Description
Further detailed information of the device, bitwise coded. More than one alarm possible at once.
Byte
Actuator springs:
0 0 Perhaps stiffness increased (TEST)
0 1 At full capacity
0 2 At full capacity (TEST)
Shift of working range:
0 3 Closed position
0 4 Max. open
Friction:
0 5 Higher over whole range
0 6 Lower over whole range
0 7 Higher over partial range
1 0 Lower over partial range
1 1 Higher over whole range (TEST)
1 2 Lower over whole range (TEST)
1 3 Higher over partial range (TEST)
1 4 Lower over partial range (TEST)
Leakage in pneumatics:
1 5 Perhaps existing (TEST)
1 6 Perhaps existing
1 7 Too large (TEST)
2 0 Perhaps too large
2
2
2
2
2
2
2
3
3
3
3
3
3
3
DIAGNOSIS_EXT_1_RAW
DIAGNOSIS_EXT_2_RAW
62
63 r
r
Diagnostic alarms irrelevant of the selected classification
DL_TRIGGER_SELECT_BIN
135 N r/w ALL
0 = Binary input 1
1 = Binary input 2 Binary input options for triggering in the data logger.
Note