Samson 3730-4, Mounting And Operating Instructions

Page: 169 / 212

EB 8384-4 EN
169
AO Transducer Block, Slot 1 · Manufacturer-specific parameters Appendix
Description
Indicates the minimum interval to perform the hysteresis test (EXPERT
+
).
Indicates and modifies the blocking position.
Type of characteristic.
Text field (32 characters) to describe the characteristic used
Indicates and modifies the closing direction.
Specifies the number of initialization cycles that have been performed since the last reset.
Structure of read and write parameters of the data logger (EXPERT
+
)
Structure of read parameters of the data logger (EXPERT
+
)
0. . Test information
1. . Max. pretrigger time
2. . Progress
3. . Day counter
4. . Hour counter
5. . Minute counter
6. . Second counter
7. . 100 ms tact counter
Specifies the delay time (reset criterion when closed-loop operation monitoring is in progress). If the entered
DELAY_TIME is exceeded and the system deviation is outside the specified TOLERANCE_BAND, a control loop
error is indicated. Determined from the minimum transit time during initialization.