Samson 3730-4, Mounting And Operating Instructions

Page: 168 / 212

AO Transducer Block, Slot 1
· Manufacturer-specific parameters
168
EB 8384-4 EN
Appendix AO Transducer Block, Slot 1 · Manufacturer-specific parameters
Parameter Index SK Access Mode Selection/display [default value] Description
AUTOSTART_HYST
194 S r/w ALL
Indicates the minimum interval to perform the hysteresis test (EXPERT
BLOCKING_POSITION
166 S r/w ALL
Indicates and modifies the blocking position
CHARACT_TYPE 173 S r/w ALL Type of characteristic.
Text field (32 characters) to describe the characteristic used
CLOSING_DIRECTION
165 S r/w ALL
Indicates and modifies the closing direction.
COUNTER_INIT_START
198 r
Specifies the number of initialization cycles that have been performed since the last reset.
DATALOGGER
185 r
Element Parameter name Structure of read and write parameters of the data logger (EXPERT
0 DATALOGGER_SELECT
1 TRIGGER_SELECT
2 SAMPLE_RATE
3 START_VALUE
4 LOGGING_LIMIT
5 PRETRIGGER_TIME
DATALOGGER_READ
186 r
Element Parameter name Structure of read parameters of the data logger (EXPERT
0
1
2
3
4
5
6
7
0 TESTINFO
1 MAX_PRETRIGGERZEIT
2 FORTSCHRITT
3 ZÄHLER_TAGE
4 ZÄHLER_STUNDEN
5 ZÄHLER_MINUTEN
6 ZÄHLER_SEKUNDEN
7 ZÄHLER_100msTAKT
DELAY_TIME 181 S r/w ALL [30] Specifies the delay time (reset criterion when closed-loop operation monitoring is in progress).
DELAY_TIME is exceeded and the system deviation is outside the specified TOLERANCE_BAND, a
error is indicated.