Samson 3730-4, Mounting And Operating Instructions

Page: 131 / 212

EB 8384-4 EN
131
Physical Block, Slot 0 · Profile-specific parameters Appendix
Description
Indicates current state of process alarms in the Physical Block.
Contains the ID number of the plant unit.
Used to select whether the positioner is used according to Profile 3.01 or used with condensed states.
A change is not permissible in the DATA_EXCHANGE (cyclic) state.
User-definable text to describe the device within the application, which is saved in the field device.
Contains a list of notified bodies that have issued explosion protection certificates for this field device.
Contains manufacturer-specific identification of the field device.
Contains date of installation of the field device.
Contains the identification code of the manufacturer of the field device.
User-definable text saved in the field device.
Contains the serial number of the field device and provides clear identification of the device in combination with
DEVICE_MAN_ID and DEVICE_ID.
Contains the classification of the diagnostic and status alarms.
Detailed information of the device, bitwise coded. More than one alarm possible at once.
Type of alarm: A
Dynamic alarm: automatically reset after 10 seconds
R Static alarm: remains active as long as the reason for the alarm still exists in the device
Type of alarm Description
. . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . .
. . . .
. . . R Hardware error in the electronics
. . . R Hardware error in the mechanics
. . . R Temperature in the electronics too high
. . . R Checksum error in the data memory
. . . R Error occurred in measurement
. . . R Device not initialized/Self-calibration has not been performed
. . . R Initialization incorrect
. . . R Zero point error (end position)
. . . R Configuration invalid/invalid address
. . . A Restart-up (warm start) performed
. . . A New start-up (cold start) performed
. . . R Maintenance necessary
. . . R Invalid characteristic
. . . R The ID number selected could not yet be implemented by the device