Samson 3730-4, Mounting And Operating Instructions

Page: 119 / 212

Code
no.
Parameter – Display, values
[default setting]
Description
Important ! Codes with marked with an asterisk (*) must be enabled with Code 3 prior to configuration.
48* d8
EXPERT
+
activation Enter the activation code for EXPERT
+
.
After the activation procedure has been successfully completed,
YES appears under d8.
PA parameters PA-P
F0 Firmware Rev.
Communication
F1 Binary input1 1 Active 0 Inactive
F2 Binary input2 1 Active 0 Inactive
F3
Counter device start-ups
F4 Counter reset
communication
F5 Counter reset control
F6
Counter reset bus
connection
F7 Slave status 0 Undefined 2 wait_cfg
1 wait_prm 3 data_exchg
AO Function Block A
A0
Target Mode Required operating mode
A1 Actual Mode
Actual operating mode
A2 SP Value
Displays the setpoint (reference variable)
A3 SP Status and its status
A4
Readback Value Displays the current position
A5
Readback Status and its status
A6 Out Value
Displays the manipulated variable (output value)
A7 Out Status
and its status
A8 Unassigned
A9
Simulate Positioner simulation
1 Enabled 0 Disabled
EB 8384-4 EN
119
Appendix