Samson 3730-4, Mounting And Operating Instructions

Page: 181 / 212

EB 8384-4 EN
181
DI1/2 Function Block, Slot 2/3 · Profile-specific parameters Appendix
Index Parameter
26 OUT_D
30 CHANNEL
31 INVERT
Index Parameter
36
FSAFE_TYPE
37 FSAFE_VAL_D
40 SIMULATE
Index Parameter
240 VIEW1
Description
Indicates the current states of the process alarms in the DI Function Block.
Contains the ID number of the plant unit.
Contains the identification of the batch process.
Links the Function Block with its associated Transducer Block.
. . . .
. .
. . . . . . . . . . . . . . . . . . . . . . .
Defines the reaction of the device when an error occurs
. . . FSAFE_VALUE is used instead of OUT_D
. . . Use of the last valid value of OUT_D
. . . OUT_D does not have a valid value
Default value for OUT_D when the sensor or the sensor electronics error is detected.
Inverts the input value PV_D (sent by DI Transducer Block) before it is saved in the OUT_D parameter and sent.
Indicates the actual mode.
This parameter is the output of the Function Block. It can be defined by the user in MAN mode.
The input value (PV_D) issued by the Transducer Block can be simulated for test purposes. This also results in DI
Transducer Block and the DI Function Block being disconnected.
Indicates the revision level of static data.
This parameter is used to group blocks for their faster analysis.
Blocks are grouped by entering the same value in the STRATEGY parameter of each block.
Used to enter a user-selected text to identify and assign blocks.
Desired mode of operation
Collective command allowing a group of parameters to be read with one single read-service.