Sam4s SPS-300 OP Manual v1.35
Program Mode Programming • 175
Option
Entry
Description
RESET Z COUNTER
AFTER Z2 REPORT
DAILY SALES RPT
Y or N
Choose
Y
or
N
to determine if you wish to reset the Z
counter after a Z2 of the daily sales report.
PRINTER PAPER
SENSOR ACTIVE
Y or N
A built in paper sensor determines whether paper is
currently loaded in the printer. If
Y
, operations are not
allowed without paper loaded. If
N
, operations are
allowed when paper is out.
DEACTIVATE SPLIT
PRICING
Y or N
If
N
, both multiplication and split pricing calculations
can be done with the
X/TIME
key. If
Y
, only
multiplication can be done with the
X/TIME
key.
ALLOW DIRECT MULT
Y or N
If
Y
, you can multiply preset items by simply entering
the quantity, then pressing the preset PLU key.
INVENTORY CNT PGM
Y:ADD CURR. LVL
N:COUNTER REPLACE
CURR LEVEL
Y or N
Choose
Y
or
N
to determine whether the quantity of
inventory you enter in the PLU stock program adds to
existing inventory quantity, or whether it replaces the
current inventory quantity.
GLOBAL ENTRY LIMIT
(0-14)
0-14
Enter a digit to determine the number of numeric digits
that can be entered for any register function. Enter 0
for no limit.
DISABLE PRICE LEVEL
KEY
LEVEL 1:
LEVEL 2:
LEVEL 3:
LEVEL 4:
LEVEL 5:
Y or N
You can choose to disable any of the price level keys
here.
PRICE LEVEL IS
0:POP UP AFTER ITEM
1:POP UP AFTER SALE
2:STAYDOWN
0, 1, or 2
If you press a price level key, you have the option of
the level key applying only to the next item (0), having
the same level key apply to any subsequent item
registered in the same transaction (1), or having the
same level key apply to any subsequent item on any
subsequent transaction (2).
Note: Set to “Staydown” when using time activated
price levels. Also set level activate time in program
mode.
ELEC. JOURNAL
Y or N
Select
Y
to enable the electronic journal. The
electronic journal captures in memory what you would
print line by line on a traditional journal. The four
options that follow control the electronic journal
feature. The electronic journal can be read and printed
in the
X
control lock position or reset and printed in the
Z
control lock position.
PROMPT OPERATOR
WHEN E.J. IS FULL
Y or N
If the electronic journal is enabled above, select
Y
if
you wish to display a message to notify the operator
when the journal memory is full.
