34 • Getting Started
Sam4s SPS-300 OP Manual v1.35
SPS-345 Memory All Clear
1.
Turn the power switch located on the right side of the register to the
OFF
position.
2.
Turn the control lock to the
S
position.
3.
Press and hold the key position where the
SUBTOTAL
key is located on the default
keyboard layout.
SPS-345
Press and hold the
SUBTOTAL
key position
4.
Continue to hold the appropriate key while turning the power switch to the
ON
position. The message “RAM ALL CLEAR" displays.
5.
Press the upper left key of the keyboard, then the lower left key, then the upper right
key, and finally press the lower right key.
3
SPS-345
Default
Configuration
(21 PLU Keys)
1
4
3
1
SPS-345
Expanded
(63 PLU keys)
4
2
2
Note:
In the default configuration, there are 21 double-width PLU keys. Under each key, the
left-most key is inactive and the right-most key is active. The four-key sequence shown with the
default configuration will set the keyboard in the default 21-PLU key configuration.
When the keyboard is expanded, the four-key sequence shown will set the keyboard in the
expanded configuration.
If you wish to build a custom configuration, you will want to perform a memory clear for the
expanded configuration, and then assign each key position individually.