Sam4s SPS-300 OP Manual v1.35
Service Mode Programming • 143
Press
OK
Button. The download takes about 30 seconds; the scroll bar will track the
progress of the download. At the ECR, the display will flash slowly while the update
is taking place.
When complete, the message Completed displays on the PC. Click
OK
and the
Download program will close. At the ECR, the display will change to a green color
indicating the update is complete. Turn the power switch to the
OFF
.
Update Program Area
Connect the
Serial Cable
from ECR to PC.
At the register, turn the control lock to the
S
position.
Turn the power switch to the
OFF
position.
Press and hold the
CASH
and
CLERK
keys. (Use the keys in their default locations,
the upper-right and lower-right keys on the keyboard.)
While continuing to hold the
CASH
and
CLERK
keys, turn the power switch to the
ON position. (The display will illuminate and the error tone will sound beep-beep-
beep in quick succession.) Release the keys.
At the PC, execute the program
“NEWNET_DOWN.exe”
. The Download dialog
box displays.
Select the appropriate com port connection at your
PC
at the
PORT#
option buttons.
Click
SEL…
find the folder where the update files are located and select SPS300.bin.
Select
Program code + Font
in the
Select One
option buttons.
Press
OK
Button. The download takes about 3 minutes. At the PC, the scroll bar
will track the progress of the download. At the ECR, the display will flash (Current
program is being erased), after a few seconds, the display will continue to flash, but
at a slower rate. This continues for about 3 minutes while the new program is being
loaded.
