Sam4s SAP-630FT Manual Download Page 27

Page: 27 / 271

Sam4POS 6600/4800II Program Manual v2.1

Navigating Sam4POS

•

The new note is
added to the list.

To edit or delete
notes; tap/touch on

the

desired note from

the

list:

Press the note pad

icon

to edit the note;

press

the trash can icon

delete the note;

press

the

icon to close

the

note.

Press the note icon

to close the list.

Navigation Tips

Navigating the various screens within the S

4POS application is very intuitive. Screens are setup with

easily identifiable icons to quickly access and select the various program areas and options.

Common Icons

Icon

Description

Back Arrow, used to exit the current Mode selection, go back one screen.

Use the Return icon to go back to the previous screen/selection.

Mode Sub Menu icons, used to display/hide the sub menu for the current mode.

Summary of Contents for SAP-630FT
















































































































































































































































































Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands

Sam4s SAP-630FT, Manual

Search results

Summary of Contents for SAP-630FT

Reviews:

Related manuals for SAP-630FT

Brands by name

Popular brands